Airtac SC100 Standard Cylinder SC100X190TC
The AirTAC Airtac SC100 Standard Cylinder SC100X190TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 190mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke190 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X190TC
The AirTAC SC100X190TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and PT1/2 port provide a robust platform for medium-to-heavy linear motion tasks.
This model features a TC centre trunnion mount, supplied with the TCM1 bracket (F-SC100TC), allowing the cylinder body to pivot during operation. The 190 mm stroke is well within the 1500 mm standard maximum for the 100 mm bore, and the adjustable air cushion (29 mm length) decelerates the piston smoothly at end of travel.
Airtac SC100 Standard Cylinder SC100X190TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X190TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X190TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X190TC Is Used
Conveyor Diverters
Pivoting gate or diverter arms on packaging lines where the trunnion mount allows the cylinder to swing with the mechanism.
Clamping Fixtures
Heavy-duty workpiece clamping in machining centres, using the 7 kN force to secure parts during milling or drilling.
Press Actuation
Providing the linear thrust in small pneumatic presses for assembly, forming, or stamping operations.
Is the Airtac SC100 Standard Cylinder SC100X190TC the Right Cylinder?
Selecting the SC100X190TC means matching its 100 mm bore, 190 mm stroke, PT1/2 port thread, TC trunnion mount, and the absence of a magnet sensor option. If your load requires less force, consider the 80 mm bore SC80 series, which provides 2513 N at 0.5 MPa. For strokes over 300 mm, always evaluate side-load conditions; an external guide or guided cylinder is recommended to protect the rod bearing from bending moments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X190TC FAQ
At the standard 0.5 MPa operating pressure, it produces 3927 N extending (push) and 3681 N retracting (pull). The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod design and is physically shorter than an ISO 15552 profile cylinder. It is only a direct dimensional replacement for another AirTAC SC tie-rod cylinder with the same bore, stroke, PT ports, and TC mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X190TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.