
The AirTAC SC100 Standard Cylinder SC100X192SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 192mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X192SN is a double-acting pneumatic cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 192 mm stroke suits medium-reach clamping and pressing tasks where a compact tie-rod body is preferred. The 25 mm piston rod and PT1/2 ports provide solid flow capacity for consistent cycling.
This model includes a built-in magnet (-S) so CMSG, DMSG, or EMSG sensors clamp directly onto the barrel for rod-position feedback. NBR seals (-N) are fitted for standard nitrile compatibility, and the PT port thread matches common industrial plumbing. The body length A is 188 mm, giving an extended length of approximately 380 mm.
| Model | Airtac SC100 Standard Cylinder SC100X192SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 192 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×192 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa securely holds steel fabrications during welding or machining, with magnetic sensors confirming jaw position before the cycle starts.
Reliable 192 mm stroke stops or diverts loaded pallets on gravity roller conveyors. The NBR seals handle typical workshop air, and the magnet enables end-of-stroke detection.
Drives a compaction plate with up to 7068 N at 0.9 MPa. The tie-rod construction simplifies maintenance in dusty recycling environments, and sensor feedback prevents incomplete strokes.
Choose the SC100 bore when your application needs around 3927 N push at 0.5 MPa. If you can work with 2513 N, stepping down to an SC80 reduces weight and air consumption. For higher force, the SC125 delivers 6136 N at the same pressure. The 192 mm stroke is within the 1500 mm max standard range for this bore.
For direct replacement, match five points: 100 mm bore, 192 mm stroke, PT1/2 port thread, NBR seal material, and the built-in magnet (-S) for sensor mounting. If the rod sees side load at this stroke, consider an external guide or a guided-cylinder configuration to protect the rod bearing from bending stress.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code means a magnet is built into the piston, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors clamp directly onto the barrel tie-rods without extra brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.