
The AirTAC SC100 Standard Cylinder SC100X193S is a genuine double-acting standard air cylinder with a Ø100mm bore and 193mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X193S is a double-acting AirTAC SC tie-rod cylinder with a 100 mm bore and 193 mm stroke, factory-equipped with a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors. At 0.5 MPa air pressure it generates 3927 N pushing force and 3681 N pulling force, placing it firmly in the heavy-duty industrial class for clamping and pressing tasks.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 port connections. The adjustable air cushion at each end (29 mm cushion length) decelerates the piston smoothly, and the body length A is 188 mm, giving a total extended length of approximately 381 mm. Standard TPU seals provide a -20 to +70 °C operating range.
| Model | Airtac SC100 Standard Cylinder SC100X193S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 193 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×193 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa and 193 mm stroke reliably raises or stops heavy pallets on conveyor lines, with the magnetic piston signaling end-of-stroke via barrel-mounted sensors.
Used in welding and machining fixtures, the SC100X193S applies consistent clamping force to large fabrications, and the adjustable cushion prevents impact damage to the fixture.
The 193 mm stroke drives a compaction plate into bulk waste or recyclables. The 7068 N theoretical force at 0.9 MPa handles dense materials, while the magnet enables position feedback for cycle control.
Choose the SC100X193S when your application needs the 3927 N push force of a 100 mm bore at standard plant pressure. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) reduces air consumption and physical size. For heavier loads, the 125 mm bore delivers 6136 N at the same pressure.
For a direct replacement, match five points: 100 mm bore, 193 mm stroke, PT1/2 ports, the built-in magnet (-S suffix), and the basic (no-bracket) mounting. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders. At this stroke, the 25 mm rod is well-supported, but any significant side load still requires an external linear guide.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa (approximately 5 bar), the pushing force is 3927 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in SC100X193S means a magnet is built into the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.