
The AirTAC SC100 Standard Cylinder SC100X195 is a genuine double-acting standard air cylinder with a Ø100mm bore and 195mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X195 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering a substantial push force of 3927 N at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and 195 mm stroke, this model suits medium-to-heavy linear actuation tasks where a compact footprint is needed—its body length A is just 188 mm, keeping the total extended length to approximately 383 mm.
This cylinder uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT1/2 port connections. The adjustable air cushion (29 mm length) decelerates the piston smoothly at end-of-stroke, reducing impact and noise. Standard TPU seals provide reliable operation from -20 to +70 °C, making this a robust, genuine AirTAC actuator for demanding industrial environments.
| Model | Airtac SC100 Standard Cylinder SC100X195 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides the 3927 N push force at 0.5 MPa needed to divert medium-weight packages or products on conveyor lines, with the 195 mm stroke offering sufficient reach for standard chute gates.
Delivers consistent, high clamping force for welding jigs or assembly presses. The adjustable cushion protects tooling from impact damage at the end of the 195 mm stroke.
Ideal as a compact actuator in small hydraulic-press substitutes or forming stations, generating up to 7068 N at 0.9 MPa for light pressing, punching, or riveting operations.
Choose the SC100 bore when your application requires roughly 4000 N of push force at standard plant pressure. If your load is closer to 2500 N, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For loads exceeding 6000 N, the SC125 bore (6136 N at 0.5 MPa) provides the next logical step up.
For a 195 mm stroke, side-loading is typically minimal, but always ensure the load is guided and aligned with the rod axis. When replacing an existing cylinder, match five key points: 100 mm bore, 195 mm stroke, PT1/2 port thread, the specific mounting accessory (this is a basic body-mount model), and the presence or absence of a magnet (this model has no built-in magnet).
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than a comparable ISO 15552 cylinder (body length A is 188 mm). It is not dimensionally interchangeable with ISO 15552 profile cylinders. It can only directly replace another AirTAC SC tie-rod cylinder of the same bore, stroke, and port configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.