
The AirTAC SC100 Standard Cylinder SC100X1980 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1980mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1980 is a double-acting, single-rod tie-rod cylinder with a 100 mm bore and an extended 1980 mm stroke. This non-standard stroke length exceeds the standard maximum of 1500 mm for this bore, making it a made-to-order solution for applications requiring exceptionally long linear travel. At 0.5 MPa, it delivers a push force of 3927 N and a pull force of 3681 N, providing substantial power for heavy-duty automation tasks.
This cylinder features a 25 mm diameter piston rod with an M20x1.5 rod thread and PT1/2 port connections. The body length A is 188 mm, resulting in a total extended length of approximately 2168 mm. It includes an adjustable pneumatic cushion (29 mm cushion length) to decelerate the piston smoothly at stroke ends. The default TPU seals provide an operating temperature range of -20 to +70 °C. For such a long stroke, an external guide system is strongly recommended to protect the rod from bending under side loads.
| Model | Airtac SC100 Standard Cylinder SC100X1980 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1980 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1980 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Ideal for pushing heavy pallets or large components across wide conveyor sections or staging areas, leveraging the 1980 mm stroke and 3927 N of force at 0.5 MPa.
Transfers large wooden, metal, or composite panels between distant process stations in furniture or automotive manufacturing, where a single long-stroke cylinder simplifies the design.
Actuates a long-travel gate or valve at the bottom of a large silo or hopper, providing the necessary reach and force to control the flow of bulk materials.
Select the SC100 bore when your application requires a push force around 3927 N at 0.5 MPa. If you need a higher force in the same tie-rod format, the SC125 delivers 6136 N at the same pressure. For a lower force and a more compact footprint, the SC80 provides 2513 N. Always match the bore, stroke, port thread (PT), mounting accessory, and magnet option when replacing an existing cylinder. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
For this 1980 mm stroke, rod buckling and side-load bending are critical concerns. The unsupported 25 mm rod is vulnerable to deflection under compressive or lateral loads. It is essential to either guide the load externally with linear rails or use a guided cylinder configuration to prevent premature seal and bearing wear.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.7 MPa operating pressure, the theoretical push force is 5497 N, and the pull force is 5153 N (calculated from the 3681 N pull force at 0.5 MPa). The maximum operating force at 0.9 MPa is 7068 N push.
It is not recommended. The 25 mm diameter rod on a 1980 mm stroke is highly susceptible to bending and buckling under side loads or high compressive forces. An external guide system or a rod support is necessary to ensure reliable operation and prevent damage to the piston rod and seals.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.