
The AirTAC SC100 Standard Cylinder SC100X200G is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X200G is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the 0.9 MPa maximum operating pressure. With a 100 mm bore and 200 mm stroke, this model uses a 25 mm diameter piston rod and features an adjustable air cushion (29 mm length) to decelerate the piston smoothly at end of travel.
This variant is configured with G (BSP parallel) port threads for direct compatibility with BSPP fittings, and the standard TPU/NBR seals support an operating temperature range of -20 to +70 °C. The total extended body length is approximately 388 mm, making it a compact yet powerful actuator for industrial automation tasks requiring substantial force in a short stroke.
| Model | Airtac SC100 Standard Cylinder SC100X200G |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Generates up to 7068 N of clamping force at 0.9 MPa for securely holding large workpieces during machining, welding, or assembly operations.
Provides the 3927 N push needed at 0.5 MPa to reliably stop or lift heavy pallets on conveyor lines, ensuring precise positioning in material handling systems.
Ideal for small pneumatic presses and forming tools where a compact 200 mm stroke and high force output are required for bending, riveting, or stamping light-gauge materials.
Choose the SC100X200G when your application needs the 3927 N push force this 100 mm bore provides at standard plant air pressure. If your load requires less force, stepping down to the 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For strokes of 300 mm or longer, evaluate side-load conditions carefully; an unsupported 25 mm rod at full extension can be subject to bending moments, and an external guide or guided cylinder should be specified to protect the rod bearing and seals.
When replacing an existing cylinder, match these five points exactly: 100 mm bore, 200 mm stroke, G (BSPP) port thread, basic mounting (no accessory bracket), and no magnet. This ensures a direct dimensional and performance fit for another AirTAC SC tie-rod cylinder of the same configuration.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 profile cylinder and is not dimensionally interchangeable with that standard. It is a direct replacement only for another AirTAC SC tie-rod cylinder with identical bore, stroke, G thread, and basic mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.