
The AirTAC SC100 Standard Cylinder SC100X200H is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X200H is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 200 mm stroke. It generates a substantial push force of 3927 N at 0.5 MPa and reaches 7068 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This variant is fitted with Viton (FKM) seals, designated by the 'H' suffix, which shifts the operating temperature range to 0 to +150 °C. This makes it suitable for applications involving elevated ambient heat or aggressive media where standard TPU seals would degrade. The cylinder features an adjustable air cushion (29 mm length) and PT1/2 port threads.
| Model | Airtac SC100 Standard Cylinder SC100X200H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The Viton seals allow this cylinder to operate reliably in ambient temperatures up to 150 °C, making it ideal for clamping hot workpieces, opening furnace doors, or actuating mechanisms near ovens and autoclaves.
With 7068 N of force at 0.9 MPa, the SC100X200H excels in short-stroke pressing, riveting, and stamping operations where a compact, high-thrust actuator is needed in a hot production environment.
The FKM seal material resists many aggressive chemicals and solvents. Use this cylinder for valve actuation or material handling in chemical dosing and processing lines where seal integrity is critical.
Select the SC100X200H when your application requires a high-thrust actuator that can withstand elevated temperatures up to 150 °C. If the 3927 N push force at 0.5 MPa exceeds your requirement, consider stepping down to the SC80 bore (2513 N at 0.5 MPa) to reduce air consumption. For higher forces, the SC125 bore offers 6136 N at the same pressure.
For a direct replacement, match five key points: 100 mm bore, 200 mm stroke, PT port thread, basic (no bracket) mounting, and the Viton seal material. This is a tie-rod cylinder; it is not dimensionally interchangeable with ISO 15552 profile cylinders. At this 200 mm stroke, the rod's bending moment is moderate, but always ensure the load is guided and aligned axially to prevent seal wear.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
The theoretical push force is 3927 N at 0.5 MPa, 5497 N at 0.7 MPa, and 7068 N at the maximum operating pressure of 0.9 MPa. The pull force on the retract stroke is slightly lower at 3681 N at 0.5 MPa due to the 25 mm rod area.
No. The SC100X200H is a standard double-acting cylinder and will not hold its position if air pressure is exhausted or the directional valve is centered. The adjustable air cushion only decelerates the piston at the end of stroke. For load holding, you must add an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.