
The AirTAC SC100 Standard Cylinder SC100X200SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X200SCB is a double-acting tie-rod cylinder with a 100 mm bore and 200 mm stroke, delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 25 mm piston rod and PT1/2 ports make it a robust choice for medium-to-heavy linear actuation tasks.
This model is configured with a built-in magnet (-S suffix) for easy mounting of CMSG/DMSG/EMSG sensors, and a rear double clevis (CB) mount, part F-SC100CB, for pivoting applications. The standard TPU seals provide reliable operation from -20 to +70 °C.
| Model | Airtac SC100 Standard Cylinder SC100X200SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
High-force clamping in machining centres and welding fixtures, where the 3927 N push at 0.5 MPa securely holds heavy workpieces.
Small pneumatic presses for bending, punching, or riveting operations, leveraging the cylinder's 7068 N maximum thrust at 0.9 MPa.
Actuating chutes, gates, and levers on harvesters and spreaders, with the rear clevis mount allowing free pivoting on uneven terrain.
For applications needing less force, consider stepping down to the 80 mm bore (2513 N at 0.5 MPa). If your load requires a pivoting mount but with a single lug, the CA rear single clevis is an alternative. When replacing, match bore, stroke, PT port thread, the -S magnet option, and the CB mounting to ensure direct compatibility. The 200 mm stroke is well within the 1500 mm maximum standard stroke for this bore.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, this cylinder provides 3927 N pushing and 3681 N pulling force. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
It is a direct replacement for another AirTAC SC series cylinder with identical 100 mm bore, 200 mm stroke, PT ports, -S magnet, and CB rear double clevis mount. It is not dimensionally interchangeable with ISO 15552 cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.