Airtac SC100 Standard Cylinder SC100X200SN
The AirTAC Airtac SC100 Standard Cylinder SC100X200SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X200SN
The AirTAC SC100X200SN is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 200 mm stroke suits medium-travel clamping and pressing operations, while the 25 mm diameter piston rod provides robust resistance to bending under axial loads.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, enabling precise end-of-stroke detection without external brackets. The NBR seal (-N suffix) offers reliable sealing for general industrial air service, and the standard PT1/2 port thread ensures straightforward pneumatic connection.
Airtac SC100 Standard Cylinder SC100X200SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X200SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X200SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X200SN Is Used
Heavy-Duty Clamping
The 3927 N force at 0.5 MPa makes this cylinder ideal for pneumatic clamping fixtures in machining and welding cells, securely holding large workpieces during processing.
Part Rejection & Sorting
With its built-in magnet for sensor feedback, this actuator excels in high-speed sortation gates, reliably pushing defective or oversized items off a conveyor line with confirmed position signals.
Press-Fit Assembly
Generating up to 7068 N at 0.9 MPa, the SC100X200SN can be used in pneumatic assembly presses for installing bearings, bushings, or pins into housings where controlled force is critical.
Is the Airtac SC100 Standard Cylinder SC100X200SN the Right Cylinder?
Select the SC100 when your application requires push forces in the 3927 N range at standard shop air. If your load is closer to 2500 N, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For strokes of 300 mm or longer, evaluate side-load conditions carefully—an unsupported 25 mm rod at full extension is vulnerable to bending; use an external guide or linear bearing to protect the rod and gland seals.
For a direct replacement, match five points: 100 mm bore, 200 mm stroke, PT port thread, the built-in magnet (-S), and the NBR seal material. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X200SN FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X200SN is a double-acting cylinder that requires continuous air pressure to maintain position. If pressure is lost or the directional valve is centered, the piston can drift. For load holding without pressure, you must add a pilot-operated check valve or an external mechanical rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X200SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.