Airtac SC100 Standard Cylinder SC100X200STCN
The AirTAC Airtac SC100 Standard Cylinder SC100X200STCN is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X200STCN
The AirTAC SC100X200STCN is a double-acting, single-rod pneumatic cylinder with a 100 mm bore and 200 mm stroke, delivering a push force of 3927 N at 0.5 MPa (up to 7068 N at 0.9 MPa). This model features a built-in magnet for mounting CMSG/DMSG/EMSG sensors directly on the tie-rod barrel, a centre trunnion (TC) mount with the TCM1 bracket for pivoting applications, and NBR (nitrile) seals for reliable operation within the standard -20 to +70 °C temperature range.
The 25 mm diameter piston rod provides robust thrust, while the 29 mm adjustable air cushion at each end decelerates the piston smoothly to reduce end-of-stroke impact. With a body length A of 188 mm, the total extended length is approximately 388 mm. This cylinder is a genuine AirTAC tie-rod design, shorter than an ISO 15552 profile and not interchangeable with it.
Airtac SC100 Standard Cylinder SC100X200STCN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X200STCN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X200STCN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X200STCN Is Used
Conveyor Diverting
The 3927 N push force at 0.5 MPa and pivoting TC mount make this cylinder ideal for actuating heavy-duty diverters or gates on conveyor lines, smoothly redirecting large packages or pallets.
Welding Fixture Clamping
With a built-in magnet for end-of-stroke sensing and NBR seals, it provides reliable, high-force clamping of large assemblies in welding fixtures, confirming jaw position before the cycle starts.
Agricultural Implement Control
The robust 25 mm rod and trunnion mount allow it to pivot and control heavy levers or chutes on agricultural machinery like harvesters or spreaders, handling dusty, high-cycle conditions.
Is the Airtac SC100 Standard Cylinder SC100X200STCN the Right Cylinder?
Choose the SC100 when your application requires around 3927 N of push force at 0.5 MPa. If you need a more compact solution with slightly lower force, step down to the 80 mm bore (2513 N at 0.5 MPa); for significantly higher force, the 125 mm bore provides 6136 N at the same pressure. For this 200 mm stroke, side loading is generally not a primary concern, but always ensure the load is guided externally if any lateral force is present to prevent rod bearing wear.
For a direct replacement, match these five points: 100 mm bore, 200 mm stroke, PT port thread, centre trunnion (TC) mounting with the F-SC100TC bracket, and the built-in magnet (-S) for sensor compatibility. This cylinder is a direct fit for another AirTAC SC100X200STCN.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X200STCN FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X200STCN is a double-acting cylinder that requires continuous air pressure to maintain its position. If pressure is lost or the directional valve is centered, the piston can drift or the load can drop. For load-holding applications, you must add a pilot-operated check valve or an external mechanical rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X200STCN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.