Airtac SC100 Standard Cylinder SC100X210H
The AirTAC Airtac SC100 Standard Cylinder SC100X210H is a genuine double-acting standard air cylinder with a Ø100mm bore and 210mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke210 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X210H
The SC100X210H is a double-acting pneumatic cylinder with a 100 mm bore and 210 mm stroke, built on a durable tie-rod design. It generates a substantial push force of 3927 N at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa, making it a powerful actuator for demanding industrial tasks.
This model is specified with Viton (FKM) seals, extending its operating temperature range to 0–150 °C for reliable performance in hot environments. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end ensure smooth deceleration, while the standard PT1/2 port thread provides a straightforward pneumatic connection.
Airtac SC100 Standard Cylinder SC100X210H Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X210H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X210H
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X210H Is Used
High-Temperature Clamping
Viton seals allow this cylinder to operate reliably in ovens, autoclaves, or near heat-sealing machinery where ambient temperatures reach up to 150°C.
Heavy Pressing & Forming
With 7068 N of force at 0.9 MPa, the SC100X210H is ideal for powering small hydraulic-equivalent presses, riveting stations, and heavy-duty clamping fixtures.
Material Handling Gates
The 210 mm stroke provides ample travel for diverting heavy packages or controlling product flow on high-temperature conveyor lines in foundries or bakeries.
Is the Airtac SC100 Standard Cylinder SC100X210H the Right Cylinder?
For applications needing more force, stepping up to the 125 mm bore SC125 series provides 6136 N of push at 0.5 MPa. If a more compact solution with lower force is acceptable, the 80 mm bore SC80 series delivers 2513 N at the same pressure. Always match the bore, 210 mm stroke, PT port thread, and basic mounting when replacing this cylinder.
With a stroke of 210 mm, the 25 mm rod is well-supported for axial loads, but any significant side loading requires an external guide or a guided cylinder to prevent rod bending and premature bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X210H FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC100 cylinder with the same 210 mm stroke, PT ports, and basic mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X210H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.