Airtac SC100 Standard Cylinder SC100X210TC
The AirTAC Airtac SC100 Standard Cylinder SC100X210TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 210mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke210 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X210TC
The SC100X210TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa), making it a robust actuator for medium-to-heavy linear tasks. Its 25 mm diameter rod and 29 mm adjustable air cushion provide smooth end-of-stroke deceleration, while the centre trunnion mount allows the cylinder to pivot as it strokes.
With a 100 mm bore and 210 mm stroke, this model falls well within the 1500 mm maximum standard stroke for the SC100 series. The body length A is 188 mm, giving a total extended length of approximately 398 mm. The PT1/2 port and M20x1.5 rod thread ensure straightforward pneumatic connections and load attachment.
Airtac SC100 Standard Cylinder SC100X210TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X210TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X210TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X210TC Is Used
Pivoting Conveyor Gates
The centre trunnion mount allows the SC100X210TC to pivot freely, making it perfect for actuating diverter gates or sorting paddles on medium-duty conveyor lines.
Clamping & Welding Fixtures
With 3927 N of force at standard line pressure, this cylinder provides the consistent, controlled clamping power needed for holding parts in welding or assembly jigs.
Agricultural Equipment Actuation
The robust tie-rod design and 100 mm bore handle the dusty, demanding conditions of farm machinery, such as controlling chute doors or bale handling arms.
Is the Airtac SC100 Standard Cylinder SC100X210TC the Right Cylinder?
Choose the SC100X210TC when your application requires a pivoting actuator with substantial force. If 3927 N at 0.5 MPa exceeds your needs, stepping down to an 80 mm bore (2513 N push at 0.5 MPa) can reduce air consumption and physical size. For higher force, the 125 mm bore offers 6136 N at the same pressure.
This model includes the TC centre trunnion mount, supplied with the TCM1 bracket (part code F-SC100TC), ideal for swinging or pivoting loads. When replacing, match all five key points: 100 mm bore, 210 mm stroke, PT port thread, centre trunnion mounting, and the absence of a magnet. For strokes over 300 mm, consider an external guide to protect the rod from bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X210TC FAQ
At the standard 0.5 MPa operating pressure, the cylinder provides 3927 N pushing force and 3681 N pulling force. At the maximum 0.9 MPa operating pressure, the pushing force increases to 7068 N.
No. Like all standard double-acting cylinders, the SC100X210TC will drift if air pressure is lost or the directional valve is centred. It relies on continuous air pressure to maintain position. For load holding, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X210TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.