Airtac SC100 Standard Cylinder SC100X220SH
The AirTAC Airtac SC100 Standard Cylinder SC100X220SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 220mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke220 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X220SH
The SC100X220SH is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 220 mm stroke, it uses a 25 mm diameter piston rod and PT1/2 ports, making it a robust choice for medium-to-heavy linear actuation tasks.
This specific model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and Viton (FKM) seals (-H) that shift the operating temperature range to 0 to +150 °C, ideal for hot environments. The total extended body length is approximately 408 mm, combining the 188 mm head-to-cap dimension with the 220 mm stroke.
Airtac SC100 Standard Cylinder SC100X220SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X220SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X220SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X220SH Is Used
High-Temperature Automation
Viton seals allow reliable operation in ovens, autoclaves, and foundry equipment up to 150 °C, where standard seals would degrade.
Heavy Part Sorting
With 3927 N of push force at 0.5 MPa, this cylinder easily diverts or stops heavy packages and pallets on high-throughput conveyor lines.
Press & Clamping Fixtures
The 7068 N max force at 0.9 MPa provides ample clamping power for CNC machining fixtures and assembly presses, with sensor feedback for cycle confirmation.
Is the Airtac SC100 Standard Cylinder SC100X220SH the Right Cylinder?
Select the SC100 when your application needs a force step up from the SC80's 2513 N at 0.5 MPa, or down from the SC125's 6136 N. For this 220 mm stroke, the 25 mm rod is well-supported, but always avoid direct side loads on the rod; use an external guide or linear bearing for off-axis forces. When replacing an existing unit, match five points: 100 mm bore, 220 mm stroke, PT1/2 port thread, the built-in magnet for sensors, and the Viton seal material for high-temperature compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X220SH FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X220SH is a double-acting cylinder and will not hold its position if air pressure is lost or the valve is centered. The piston will drift. For load holding, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X220SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.