Airtac SC100 Standard Cylinder SC100X223S
The AirTAC Airtac SC100 Standard Cylinder SC100X223S is a genuine double-acting standard air cylinder with a Ø100mm bore and 223mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke223 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X223S
The SC100X223S delivers a substantial 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. This double-acting cylinder uses a 25 mm diameter piston rod with an M20x1.5 male thread, paired with a PT1/2 port for reliable pneumatic connections.
With a 223 mm stroke and a body length of 188 mm, it is built for tasks requiring a decisive linear push. The built-in magnet (denoted by the -S suffix) allows for direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel, giving you precise, non-contact end-of-stroke detection without extra brackets.
Airtac SC100 Standard Cylinder SC100X223S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X223S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 223 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X223S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×223 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X223S Is Used
Heavy Part Transfer
Shuttles heavy bins or pallets between conveyor lines, using the 3927 N push force at standard shop air to move loads reliably.
Clamping & Fixturing
Provides powerful, consistent clamping force for CNC fixtures or welding jigs, with sensor confirmation that the part is securely held.
Waste Compaction
Drives a compaction plate in small balers or compactors, where the 0.9 MPa thrust of 7068 N delivers the final squeeze.
Is the Airtac SC100 Standard Cylinder SC100X223S the Right Cylinder?
For applications needing slightly less force, stepping down to an 80 mm bore reduces push force to 2513 N at 0.5 MPa. If your load requires more muscle, the 125 mm bore offers 6136 N at the same pressure. When replacing an existing cylinder, match five key points: the 100 mm bore, 223 mm stroke, PT1/2 port thread, the basic mounting configuration, and the presence of the -S magnet for sensor compatibility. For strokes over 300 mm, consider an external guide to protect the 25 mm rod from side-load bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X223S FAQ
At 0.5 MPa, it generates 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, the push force rises to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix means a magnet is built into the piston. You can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel to detect piston position without any additional mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X223S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.