
The AirTAC SC100 Standard Cylinder SC100X315 is a genuine double-acting standard air cylinder with a Ø100mm bore and 315mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X315 is a double-acting tie-rod cylinder with a 100 mm bore and 315 mm stroke, delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at the 0.9 MPa maximum operating pressure. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide reliable deceleration for mid-to-heavy linear motion tasks.
With a body length A of 188 mm, the total extended length reaches approximately 503 mm. The standard PT1/2 ports and M20x1.5 rod thread offer straightforward pneumatic connections, while the TPU seals ensure consistent operation from -20 to +70 °C. This genuine AirTAC SC cylinder is a robust choice for industrial automation requiring a substantial force output in a compact tie-rod design.
| Model | Airtac SC100 Standard Cylinder SC100X315 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 315 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×315 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa reliably stops and transfers heavy pallets on conveyor lines, with the 315 mm stroke providing ample reach across wide roller beds.
Apply consistent, high-force clamping for large weldments or castings during machining. The adjustable cushion protects tooling by decelerating the 25 mm rod at stroke end.
Actuate a diverter chute in bulk material handling. The 100 mm bore provides the thrust to move a heavy gate against material weight, while the tie-rod design handles dusty environments.
The SC100X315 suits applications needing the 3927 N push force at 0.5 MPa. If your load requires a lighter, more compact actuator, stepping down to the 80 mm bore (2513 N at 0.5 MPa) may be appropriate. For heavier demands, the 125 mm bore provides 6136 N at the same pressure. At 315 mm stroke, the unsupported rod can experience bending under side loads; consider an external linear guide or a guided cylinder if the load is not purely axial.
For a direct replacement, match five key points: 100 mm bore, 315 mm stroke, PT1/2 port thread, the specific mounting accessory (this basic model has none), and the magnet option (this unit has no built-in magnet). Always verify the tie-rod body length A of 188 mm against your existing mounting space, as the SC series is shorter than ISO 15552 cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.7 MPa operating pressure, the SC100X315 produces a push force of 5497 N and a pull force of 3681 N (retracting). The maximum push force at 0.9 MPa is 7068 N. These values assume a static piston; dynamic forces may be slightly lower.
No, the AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so mounting dimensions are not interchangeable. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with the same 315 mm stroke, PT1/2 ports, and basic mounting configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.