Airtac SC100 Standard Cylinder SC100X327S
The AirTAC Airtac SC100 Standard Cylinder SC100X327S is a genuine double-acting standard air cylinder with a Ø100mm bore and 327mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke327 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X327S
The SC100X327S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 327 mm stroke. It generates 3927 N of push force at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly onto the barrel for contactless position sensing. The cylinder uses standard PT1/2 ports, TPU seals for a -20 to +70 °C operating range, and a 29 mm adjustable air cushion at each end to decelerate the piston smoothly.
Airtac SC100 Standard Cylinder SC100X327S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X327S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 327 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X327S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×327 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X327S Is Used
Material Handling Gates
The 3927 N push force at 0.5 MPa easily operates heavy diverter gates and stops on conveyor lines, while the built-in magnet enables end-of-stroke confirmation.
Clamping & Fixturing
Delivers up to 7068 N of clamping force at 0.9 MPa for holding large workpieces during machining or welding, with sensor feedback to interlock the process.
Palletising Pushers
The 327 mm stroke provides the reach needed to push loaded pallets onto wrapping stations, with adjustable cushioning to manage the moving mass quietly.
Is the Airtac SC100 Standard Cylinder SC100X327S the Right Cylinder?
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N push at 0.5 MPa. If higher force is required, the 125 mm bore SC125 series offers 6136 N at the same pressure. Always match the replacement cylinder on bore, stroke, PT port thread, and the magnet option—this SC100X327S requires a sensor-compatible replacement.
With a 327 mm stroke, ensure side loads are minimal or use an external guide. The 25 mm rod is robust, but long unsupported strokes can introduce bending moments that accelerate bearing wear; a guided cylinder or external linear rail is recommended for off-axis loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X327S FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in SC100X327S denotes a built-in magnet, so AirTAC CMSG, DMSG, or EMSG sensors can be clamped directly onto the barrel for non-contact position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X327S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.