Airtac SC100 Standard Cylinder SC100X330S
The AirTAC Airtac SC100 Standard Cylinder SC100X330S is a genuine double-acting standard air cylinder with a Ø100mm bore and 330mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke330 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X330S
The SC100X330S is a double-acting pneumatic cylinder with a 100 mm bore and 330 mm stroke, factory-equipped with a built-in magnet (-S) so CMSG/DMSG/EMSG reed and solid-state sensors clamp directly onto the tie-rod barrel for non-contact position sensing. At 0.5 MPa it generates 3927 N extending thrust and 3681 N on the retract stroke, placing it in the 801 kgf theoretical force class.
This model uses a 25 mm diameter piston rod with M20x1.5 male knuckle threads and PT1/2 port connections. The adjustable air cushion (29 mm length) decelerates the piston quietly at end-of-travel, and the body length A of 188 mm keeps the overall footprint compact for a tie-rod cylinder in this force range. The 330 mm stroke is within the 1500 mm maximum standard stroke for bore 100, so it ships from standard production.
Airtac SC100 Standard Cylinder SC100X330S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X330S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 330 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X330S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×330 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X330S Is Used
Pallet Stop & Transfer
The 3927 N push force at 0.5 MPa stops and transfers heavy pallets on roller conveyors. The built-in magnet provides end-of-stroke confirmation to the PLC via barrel-mounted sensors.
Clamping & Fixturing
Delivers over 7 kN at 0.9 MPa for robust workpiece clamping in CNC weld fixtures. Sensor feedback confirms the clamp is fully engaged before the cycle starts.
Baler & Compactor Ejection
The 330 mm stroke ejects compacted material bales from the chamber. The tie-rod construction handles the repetitive impact loading common in recycling applications.
Is the Airtac SC100 Standard Cylinder SC100X330S the Right Cylinder?
Choose the SC100 when the SC80 (2513 N push at 0.5 MPa) is marginal but a full 125 mm bore (6136 N) would be oversized. For this 330 mm stroke, verify that side loads are minimal or use an external guide rail—long unsupported rods can bend under off-axis force. The built-in magnet lets you add CMSG/DMSG/EMSG sensors without swapping the cylinder.
To replace an existing unit, match five points: 100 mm bore, 330 mm stroke, PT1/2 port thread, the -S magnet option, and the basic (no bracket) mounting style. If the original cylinder had a foot, flange, or trunnion mount, order the corresponding F-SC100 accessory kit separately.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X330S FAQ
At 0.5 MPa the push force is 3927 N and pull force is 3681 N. At 0.7 MPa push rises to 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf (approx. 7850 N).
Yes. The -S suffix means it has a built-in magnet, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors mount directly on the tie-rod barrel without any modification. If you need a cylinder without a magnet, order SC100X330.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X330S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.