Airtac SC100 Standard Cylinder SC100X330TCN
The AirTAC Airtac SC100 Standard Cylinder SC100X330TCN is a genuine double-acting standard air cylinder with a Ø100mm bore and 330mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke330 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X330TCN
The AirTAC SC100X330TCN is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa), built for heavy linear actuation in a 100 mm bore. This model pairs a 330 mm stroke with a 25 mm diameter piston rod and PT1/2 ports, giving you robust thrust for pressing, clamping, and material-handling tasks.
Configured with a centre trunnion (TC) mount and NBR seals, this cylinder pivots smoothly on its F-SC100TC bracket assembly, absorbing angular motion in swinging-arm fixtures. The adjustable air cushion (29 mm length) decelerates the piston quietly at each end, protecting end caps during high-cycle operation.
Airtac SC100 Standard Cylinder SC100X330TCN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X330TCN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 330 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X330TCN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×330 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X330TCN Is Used
Pallet Stop & Transfer
The 3927 N push force at 0.5 MPa and pivoting trunnion mount make this cylinder ideal for raising or stopping heavy pallets on conveyor lines, where the body needs to swing as it actuates.
Welding Fixture Clamping
Delivers consistent clamping pressure for automotive or structural welding jigs. The NBR seals suit standard shop air, and the trunnion mount lets the cylinder pivot into position.
Heavy-Duty Press Guard
Operates a sliding guard door on large hydraulic presses. The 330 mm stroke clears the opening, while the adjustable cushion prevents slamming at the end of travel.
Is the Airtac SC100 Standard Cylinder SC100X330TCN the Right Cylinder?
Choose the SC100 when your load needs roughly 4000 N at standard shop air; if you need less force, the SC80 delivers 2513 N at 0.5 MPa, while the SC125 steps up to 6136 N. For this 330 mm stroke, verify that side loads are minimal or add an external guide rail—a long unsupported 25 mm rod can bend under off-axis forces.
To replace an existing cylinder, match five points: 100 mm bore, 330 mm stroke, PT port thread, centre trunnion (TC) mounting with the TCM1 bracket, and no magnet. The SC is a tie-rod design, shorter than an ISO 15552 cylinder, so dimensional interchangeability is limited to other AirTAC SC tie-rod units of the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X330TCN FAQ
At 0.5 MPa the cylinder pushes with 3927 N and pulls with 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100 is a double-acting cylinder and will drift or drop if pressure is exhausted or the directional valve is centered. To hold a position without live pressure, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X330TCN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.