Airtac SC100 Standard Cylinder SC100X350SN
The AirTAC Airtac SC100 Standard Cylinder SC100X350SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 350mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke350 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X350SN
The AirTAC SC100X350SN is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 350 mm stroke suits medium-reach material transfer, clamping, and pressing tasks where consistent pneumatic power is required.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling rod-position feedback without external brackets. The N suffix specifies NBR (nitrile) seals, and the 25 mm diameter piston rod provides robust resistance to bending under axial loads.
Airtac SC100 Standard Cylinder SC100X350SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X350SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X350SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X350SN Is Used
Pallet Stop & Transfer
The 350 mm stroke and 3927 N push force reliably stop and transfer heavy pallets on conveyor lines, with magnetic sensors confirming end-of-stroke position.
Heavy-Duty Clamping
Generates up to 7068 N at 0.9 MPa for secure part holding during welding or machining, with NBR seals providing good wear resistance in oily shop air.
Automated Press Feeding
Moves blanks or formed parts into stamping presses. The integrated magnet lets you sequence the next action only after full extension is verified.
Is the Airtac SC100 Standard Cylinder SC100X350SN the Right Cylinder?
Choose the SC100 bore when your application needs roughly 3927 N at 0.5 MPa. For lighter loads, the SC80 bore provides 2513 N; for heavier demands, the SC125 delivers 6136 N at the same pressure. At 350 mm stroke, side-load management is critical—never allow the rod to absorb lateral forces directly. Use an external linear guide or a guided cylinder if the load is not purely axial.
For direct replacement, match five points: 100 mm bore, 350 mm stroke, PT port thread, the built-in magnet (-S), and the NBR seal material. This tie-rod cylinder is shorter than an ISO 15552 unit and is not dimensionally interchangeable with that standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X350SN FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder. It is not dimensionally interchangeable. Only replace another AirTAC SC100 tie-rod cylinder with matching bore, stroke, PT ports, magnet option, and NBR seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X350SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.