Airtac SC100 Standard Cylinder SC100X350TCG
The AirTAC Airtac SC100 Standard Cylinder SC100X350TCG is a genuine double-acting standard air cylinder with a Ø100mm bore and 350mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke350 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X350TCG
The SC100X350TCG is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 350 mm stroke. At 0.5 MPa it generates 3927 N of push force, rising to 7068 N at the maximum operating pressure of 0.9 MPa, making it a robust actuator for medium-to-heavy linear motion tasks.
This specific model is factory-configured with a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC100TC), allowing the cylinder to pivot during operation. It features G (BSP parallel) port threads, a 25 mm diameter piston rod with M20x1.5 threads, and an adjustable air cushion of 29 mm at each end to decelerate the piston smoothly.
Airtac SC100 Standard Cylinder SC100X350TCG Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X350TCG |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X350TCG
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X350TCG Is Used
Conveyor Diverter Gates
The 350 mm stroke and pivoting trunnion mount allow this cylinder to actuate heavy diverter gates on wide conveyor lines, handling the 3927 N force needed to redirect packages or bulk materials reliably.
Press-Fit Assembly Stations
Delivers a controlled 7068 N thrust at 0.9 MPa for pressing bearings, bushings, or pins into housings. The adjustable cushion protects the assembly tooling from impact damage at the end of the 350 mm stroke.
Agricultural Equipment Actuation
Suitable for pivoting chutes or lifting mechanisms on harvesters and spreaders. The G-thread ports and TPU seals provide reliable operation in dusty environments, while the trunnion mount absorbs the machine's dynamic motion.
Is the Airtac SC100 Standard Cylinder SC100X350TCG the Right Cylinder?
Select the SC100X350TCG when your application requires a pivoting mount and a push force around 3927 N at standard plant pressure. If your load demands more force, stepping up to the SC125 bore provides 6136 N push at 0.5 MPa; for a lighter, more compact solution, the SC80 bore delivers 2513 N. Ensure the 350 mm stroke is within the 1500 mm maximum standard stroke for this bore.
For strokes of 300 mm or more, always evaluate side-loading conditions. The 25 mm rod can experience bending under off-axis forces at full extension. Use an external linear guide or a guided cylinder assembly to protect the rod bearings and maintain alignment. When replacing an existing cylinder, match the 100 mm bore, 350 mm stroke, G port thread, centre trunnion mounting, and the absence of a magnet sensor to ensure a direct fit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X350TCG FAQ
At 0.5 MPa air pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder, so it is not a drop-in replacement. It will only directly interchange with another AirTAC SC tie-rod cylinder of the same 100 mm bore, 350 mm stroke, G port thread, and centre trunnion mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X350TCG
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.