Airtac SC100 Standard Cylinder SC100X35TC
The AirTAC Airtac SC100 Standard Cylinder SC100X35TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 35mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke35 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X35TC
The SC100X35TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa), built around a 100 mm bore and a 25 mm diameter piston rod. With a short 35 mm stroke and a body length A of 188 mm, this model is configured with a centre trunnion (TC) mount, allowing the cylinder to pivot during operation for applications requiring angular movement.
This genuine AirTAC tie-rod cylinder features PT1/2 ports and an M20x1.5 rod thread, with an adjustable air cushion of 29 mm to decelerate the piston smoothly at end-of-stroke. The TC mounting style ships with the TCM1 trunnion bracket (part code F-SC100TC), enabling direct integration into pivoting linkages without additional machining.
Airtac SC100 Standard Cylinder SC100X35TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X35TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X35TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X35TC Is Used
Clamping & Fixturing
The 3927 N force at 0.5 MPa and short 35 mm stroke make this cylinder ideal for pneumatic clamping fixtures in machining centres, where high holding force and a compact pivoting action are required.
Part Diverter Gates
Mounted on a trunnion, the SC100X35TC can pivot a diverter gate on a conveyor line, reliably pushing packages or materials onto a different lane with substantial force in a fast, repeatable cycle.
Mould Ejector Actuation
Provides a powerful, short ejection stroke for removing parts from moulds or dies. The centre trunnion mount allows the cylinder body to align with the ejector plate's slight arc of movement.
Is the Airtac SC100 Standard Cylinder SC100X35TC the Right Cylinder?
Choose the SC100X35TC when your application requires a high-force, short-stroke actuator that must pivot. The 100 mm bore provides 3927 N at 0.5 MPa; if you need less force, the 80 mm bore offers 2513 N at the same pressure. For longer strokes, ensure the rod is not subjected to side loads, which can cause bending and seal wear.
To replace an existing cylinder, match these five points: 100 mm bore, 35 mm stroke, PT1/2 port thread, centre trunnion (TC) mounting with F-SC100TC bracket, and the absence of a magnet. This model does not include a built-in magnet, so magnetic sensors cannot be directly mounted on the barrel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X35TC FAQ
At 0.7 MPa (7 bar), the theoretical push force is 5497 N. The pull force on the retract stroke is 3681 N at 0.5 MPa, accounting for the 25 mm rod diameter. Maximum operating force at 0.9 MPa is 7068 N.
No, this specific model code does not include the '-S' magnet option. The piston does not have a built-in magnetic ring, so reed switches like the CMSG or solid-state DMSG sensors cannot be used. You would need to order model SC100X35STC to have sensor compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X35TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.