Airtac SC100 Standard Cylinder SC100X360H
The AirTAC Airtac SC100 Standard Cylinder SC100X360H is a genuine double-acting standard air cylinder with a Ø100mm bore and 360mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke360 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X360H
The SC100X360H is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, featuring a 100 mm bore and a 360 mm stroke. At 0.5 MPa, it produces a push force of 3927 N and a pull force of 3681 N, making it a robust actuator for medium-to-heavy industrial tasks. The piston rod has a diameter of 25 mm with an M20x1.5 male thread, and the cylinder body length (A) is 188 mm, giving a total extended length of approximately 548 mm.
This model is equipped with the 'H' suffix, indicating high-temperature Viton (FKM) seals. This shifts the standard operating temperature range from -20–+70 °C up to 0–+150 °C, making it suitable for autoclaves, foundries, or drying equipment. It uses a standard PT1/2 port and features an adjustable air cushion (29 mm length) to decelerate the piston smoothly at the end of its stroke.
Airtac SC100 Standard Cylinder SC100X360H Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X360H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X360H
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X360H Is Used
Material Handling & Lifting
Provides nearly 4000 N of push force for lifting heavy totes or actuating transfer arms on assembly lines, with high-temperature seals for paint-curing ovens.
Hot Press & Clamping
Ideal for clamping fixtures in heated laminating or thermoforming presses where ambient temperatures exceed 70 °C, maintaining consistent force without seal degradation.
Processing Equipment
Actuates gates or diverters in food processing or rendering equipment subjected to high-temperature washdowns, thanks to the durable Viton seal package.
Is the Airtac SC100 Standard Cylinder SC100X360H the Right Cylinder?
Select the SC100X360H when your application requires a force of around 3900 N at standard plant pressure. If you need a more compact unit with slightly lower force, consider stepping down to the 80 mm bore (2513 N push at 0.5 MPa). For significantly higher force demands, the 125 mm bore provides 6136 N. With a 360 mm stroke, ensure that side loads are managed; the 25 mm rod is robust, but for unsupported long strokes, an external guide or a guided cylinder is recommended to prevent rod bending and premature seal wear.
For a direct replacement, match the 100 mm bore, 360 mm stroke, PT1/2 port thread, and basic mounting configuration. This unit does not include a built-in magnet, so it is not directly compatible with CMSG/DMSG sensors unless an external mounting band is used. The Viton seals are critical to match if the operating environment exceeds 70 °C.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X360H FAQ
At the maximum operating pressure of 0.9 MPa, this cylinder generates a theoretical push force of 7068 N. At a typical plant pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552 mounts. Replacements must match another AirTAC SC tie-rod cylinder of the same bore, stroke, and port thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X360H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.