Airtac SC100 Standard Cylinder SC100X360N
The AirTAC Airtac SC100 Standard Cylinder SC100X360N is a genuine double-acting standard air cylinder with a Ø100mm bore and 360mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke360 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X360N
The SC100X360N is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 360 mm stroke. It generates a substantial push force of 3927 N at 0.5 MPa and reaches 7068 N at the maximum operating pressure of 0.9 MPa, making it suitable for heavy linear actuation tasks.
This model is fitted with NBR (nitrile) seals as standard and features PT1/2 ports. The 25 mm diameter piston rod provides high rigidity, while the 29 mm adjustable air cushion at each end decelerates the piston smoothly. The body length A is 188 mm, giving a total extended length of approximately 548 mm.
Airtac SC100 Standard Cylinder SC100X360N Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X360N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X360N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X360N Is Used
Heavy Part Clamping
The 3927 N force at 0.5 MPa provides ample power for pneumatic clamps and fixtures in machining centers, securely holding large workpieces during milling or drilling operations.
Pallet Stop & Lift
Ideal for actuating heavy-duty pallet stops or lift-and-locate stations on conveyor lines, where the 360 mm stroke can raise or position pallets between different conveyor heights.
Press & Assembly Tools
Delivers the controlled linear motion needed for small pneumatic presses, riveting tools, or assembly jigs, with the NBR seals offering good wear resistance in standard factory air conditions.
Is the Airtac SC100 Standard Cylinder SC100X360N the Right Cylinder?
For applications requiring slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while the 125 mm bore SC125 series steps up to 6136 N. This 360 mm stroke is within the standard range for the 100 mm bore, which supports strokes up to 1500 mm. For strokes of this length, ensure the load is guided externally if significant side forces are present, as the rod bearing is designed for axial loads.
To match this cylinder for a replacement, verify five key points: 100 mm bore, 360 mm stroke, PT1/2 port thread, basic (no) mounting accessories, and no built-in magnet. The NBR seal material is also critical for chemical compatibility in your application.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X360N FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than a comparable ISO 15552 profile cylinder. It is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with the same bore, stroke, port thread, and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X360N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.