Airtac SC100 Standard Cylinder SC100X365
The AirTAC Airtac SC100 Standard Cylinder SC100X365 is a genuine double-acting standard air cylinder with a Ø100mm bore and 365mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke365 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X365
The SC100X365 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 365 mm stroke. At the standard 0.5 MPa operating pressure, it produces a push force of 3927 N and a pull force of 3681 N, making it suitable for medium-to-heavy linear actuation tasks where a compact footprint is required.
This model features a 25 mm diameter piston rod with M20x1.5 threads and PT1/2 ports. The total body length A is 188 mm, giving an approximate extended length of 553 mm. Its 29 mm adjustable air cushion at each end helps to decelerate the piston smoothly, reducing end-of-stroke impact and noise.
Airtac SC100 Standard Cylinder SC100X365 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X365 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 365 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X365
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×365 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X365 Is Used
Conveyor Diverting
The 3927 N push force at 0.5 MPa easily actuates heavy-duty diverter gates on wide conveyor lines, redirecting packages or pallets with a 365 mm stroke reach.
Press-Fit Assembly
Delivers controlled, repeatable force for pressing bearings or bushings into housings. The adjustable cushion fine-tunes deceleration for delicate assembly cycles.
Pallet Lift & Transfer
Provides the muscle for lifting and transferring loaded pallets between roller beds in automated storage systems, with the 365 mm stroke covering standard pallet lane spacing.
Is the Airtac SC100 Standard Cylinder SC100X365 the Right Cylinder?
For applications needing slightly less force, consider stepping down to the 80 mm bore SC80 series, which provides 2513 N of push force at 0.5 MPa. If higher force is needed, the SC125 series offers 6136 N at the same pressure. The 365 mm stroke is within the 1500 mm maximum standard stroke for this 100 mm bore.
For a stroke of this length, ensure the load is guided and side forces are minimized. An unsupported 365 mm extension of the 25 mm rod can experience bending moments under side load; use an external guide rail or a rod-alignment coupler to protect the rod bearing and seals. When replacing an existing cylinder, match five points: 100 mm bore, 365 mm stroke, PT1/2 port thread, basic (no mounting accessory), and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X365 FAQ
At 0.7 MPa operating pressure, the SC100X365 produces a theoretical push force of 5497 N and a pull force of approximately 5153 N (pull force at 0.7 MPa is not directly tabulated, but it scales linearly from the 0.5 MPa value of 3681 N). The maximum push force at 0.9 MPa is 7068 N.
No. The AirTAC SC series is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder. It is not a drop-in replacement for ISO 15552. It directly replaces another AirTAC SC100 tie-rod cylinder with matching bore, stroke, PT1/2 ports, and basic mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X365
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.