Airtac SC100 Standard Cylinder SC100X375SH
The AirTAC Airtac SC100 Standard Cylinder SC100X375SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 375mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke375 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X375SH
The AirTAC SC100X375SH is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 100 mm bore and 375 mm stroke suit medium-to-heavy linear actuation where high temperature resistance is required, thanks to the factory-fitted Viton (FKM) seals that shift the operating range to 0–150 °C.
A built-in magnet (suffix -S) allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end provide smooth deceleration, while the PT1/2 port threads ensure straightforward pneumatic connections.
Airtac SC100 Standard Cylinder SC100X375SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X375SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X375SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X375SH Is Used
High-Temperature Process Actuation
Viton seals withstand 0–150 °C, making this cylinder ideal for autoclave doors, drying ovens, and foundry equipment where standard seals would degrade.
Heavy Part Clamping & Pressing
With 3927 N at 0.5 MPa and 7068 N at full pressure, the SC100X375SH delivers the force needed for assembly presses, welding fixtures, and injection mould clamping.
Material Handling & Sorting Gates
The 375 mm stroke and magnetic piston sensing enable precise end-of-stroke confirmation for diverters, lift gates, and pushers on high-speed conveyor lines.
Is the Airtac SC100 Standard Cylinder SC100X375SH the Right Cylinder?
For applications needing less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa; for heavier loads step up to the SC125 with 6136 N. This 375 mm stroke places moderate bending stress on the rod—if side loads are present, add an external linear guide or consider a guided cylinder to protect the rod bearing and seals.
To match an existing SC100X375SH, verify five points: 100 mm bore, 375 mm stroke, PT1/2 ports, the built-in magnet (-S), and the Viton seal (-H). The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X375SH FAQ
At 0.5 MPa the push force is 3927 N and pull force is 3681 N. At 0.7 MPa push force rises to 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder and its body length (A=188 mm for the 100 bore) is shorter than an equivalent ISO 15552 profile cylinder. It will only drop-in replace another AirTAC SC tie-rod cylinder with matching bore, stroke, port thread, magnet option, and seal material.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X375SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.