Airtac SC100 Standard Cylinder SC100X380S
The AirTAC Airtac SC100 Standard Cylinder SC100X380S is a genuine double-acting standard air cylinder with a Ø100mm bore and 380mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke380 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X380S
The SC100X380S delivers a robust 3927 N push force at 0.5 MPa, scaling to 7068 N at the 0.9 MPa maximum operating pressure. This genuine AirTAC tie-rod cylinder features a 25 mm diameter piston rod and a 29 mm adjustable air cushion at each end, providing smooth deceleration for the 380 mm stroke.
A built-in magnet is integrated into the piston, designated by the -S suffix. This allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors onto the cylinder barrel for precise, non-contact end-of-stroke or mid-stroke position sensing without additional brackets.
Airtac SC100 Standard Cylinder SC100X380S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X380S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X380S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X380S Is Used
Pallet Transfer
Moves heavy pallets between conveyor lines, using the 3927 N force at standard shop air to shift loads reliably without a booster.
Clamping & Fixturing
Provides strong, consistent clamping force for large weldments or assembly fixtures, with sensor confirmation of jaw position via the built-in magnet.
Dock Lock Actuation
Powers heavy truck dock locks or vertical lift gates, where the 7068 N peak force securely holds the mechanism under load.
Is the Airtac SC100 Standard Cylinder SC100X380S the Right Cylinder?
For applications needing a 100 mm bore, this model provides 3927 N at 0.5 MPa. If your load requires more force, stepping up to the 125 mm bore offers 6136 N at the same pressure. For lighter, faster cycling, the 80 mm bore provides 2513 N. The 380 mm stroke is well within the 1500 mm maximum standard stroke for this bore. For strokes over 300 mm, ensure the 25 mm rod is adequately supported against side loads; consider an external guide or a guided cylinder if the load is not purely axial to prevent rod bending and premature bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X380S FAQ
At the standard 0.5 MPa operating pressure, it generates 3927 N pushing and 3681 N pulling. At the maximum 0.9 MPa, the push force increases to 7068 N.
Yes. The -S suffix indicates a built-in magnetic piston. You can clamp compatible AirTAC CMSG, DMSG, or EMSG sensors directly onto the tie-rod barrel to detect position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X380S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.