Airtac SC100 Standard Cylinder SC100X392S
The AirTAC Airtac SC100 Standard Cylinder SC100X392S is a genuine double-acting standard air cylinder with a Ø100mm bore and 392mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke392 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X392S
The AirTAC SC100X392S is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. With a 25 mm diameter rod and PT1/2 ports, it handles substantial pneumatic work in automation, clamping, and pressing applications.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for reliable end-of-stroke detection. The 392 mm stroke sits within the standard range for the 100 mm bore, and the adjustable air cushion at each end decelerates the piston smoothly over a 29 mm cushion length.
Airtac SC100 Standard Cylinder SC100X392S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X392S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 392 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X392S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×392 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X392S Is Used
Material Handling
Operates pushers and lifters in automated warehouses, using 3927 N of force to move pallets and goods with sensor-confirmed position feedback.
Heavy Pressing
Provides consistent clamping force in hydraulic-pneumatic press conversions, where the magnet allows cycle counting via DMSG sensors.
Conveyor Diverters
Actuates heavy-duty diverter gates on wide conveyor systems, with the -S magnet enabling end-of-travel sensing in dusty environments.
Is the Airtac SC100 Standard Cylinder SC100X392S the Right Cylinder?
For applications needing a 100 mm bore cylinder with a 392 mm stroke, the SC100X392S provides a robust force profile. If your load requires less force, stepping down to an 80 mm bore reduces push force to 2513 N at 0.5 MPa. For heavier loads, the 125 mm bore offers 6136 N. When using a stroke over 300 mm with a 25 mm rod, ensure the load is guided to prevent rod bending from side forces. To replace this cylinder, match the 100 mm bore, 392 mm stroke, PT1/2 ports, built-in magnet, and tie-rod mounting pattern.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X392S FAQ
At 0.5 MPa, the push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N.
Yes, the -S suffix indicates a built-in magnet, making it compatible with AirTAC CMSG, DMSG, and EMSG series sensors that clamp directly onto the tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X392S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.