Airtac SC100 Standard Cylinder SC100X395S
The AirTAC Airtac SC100 Standard Cylinder SC100X395S is a genuine double-acting standard air cylinder with a Ø100mm bore and 395mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke395 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X395S
The SC100X395S is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the 0.9 MPa maximum operating pressure. With a 100 mm bore, 25 mm piston rod, and a 395 mm stroke, it provides a balanced combination of high thrust and mid-range linear travel for demanding factory automation tasks.
This model includes the factory-installed -S magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The adjustable air cushion at each end (29 mm cushion length) decelerates the piston smoothly, while the PT1/2 port threads and TPU seals suit standard compressed-air systems operating from -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X395S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X395S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 395 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X395S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×395 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X395S Is Used
Pallet & Case Handling
The 3927 N push force at 0.5 MPa easily moves loaded pallets, cases, or dunnage on transfer conveyors, with the 395 mm stroke spanning wide roller beds.
Clamping & Pressing
Ideal for heavy-duty clamping fixtures and small forming presses where 7068 N at 0.9 MPa provides secure part holding, and the -S magnet signals clamp/unclamp confirmation.
Gate & Diverter Actuation
Actuates material-flow gates or diverters in chutes and hoppers. The built-in magnet enables end-of-travel sensing to sequence downstream equipment reliably.
Is the Airtac SC100 Standard Cylinder SC100X395S the Right Cylinder?
Choose the SC100 when your load requires roughly 4000 N at standard plant pressure; if you need less force, the SC80 bore delivers 2513 N push at 0.5 MPa, while stepping up to the SC125 provides 6136 N. For this 395 mm stroke, ensure side loads are minimal or use an external guide rail—a long unsupported 25 mm rod can bend under off-axis forces.
To replace an existing cylinder, match five points: 100 mm bore, 395 mm stroke, PT1/2 port thread, the basic mounting (no bracket), and the -S magnet for sensor compatibility. This is an AirTAC SC tie-rod cylinder; it is shorter than ISO 15552 profiles and is not dimensionally interchangeable with them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X395S FAQ
At 0.5 MPa the cylinder pushes with 3927 N and pulls with 3681 N. At the maximum operating pressure of 0.9 MPa, the push force rises to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in SC100X395S means a magnet is built into the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X395S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.