Airtac SC100 Standard Cylinder SC100X410S
The AirTAC Airtac SC100 Standard Cylinder SC100X410S is a genuine double-acting standard air cylinder with a Ø100mm bore and 410mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke410 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X410S
The SC100X410S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 410 mm stroke. At 0.5 MPa air pressure it generates 3927 N of push force and 3681 N on the pull stroke, rising to a robust 7068 N push force at the maximum operating pressure of 0.9 MPa.
The built-in magnet (-S suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for non-contact position feedback. This model uses a 25 mm diameter piston rod with an M20x1.5 male thread, PT1/2 port connections, and a 29 mm adjustable air cushion at each end to decelerate the piston smoothly.
Airtac SC100 Standard Cylinder SC100X410S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X410S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 410 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X410S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×410 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X410S Is Used
Material Transfer & Sorting
The 410 mm stroke pushes bins or product carriers across a conveyor junction. The built-in magnet lets sensors confirm full extension and retraction at each cycle, preventing jams.
Press-Feed Assist
Delivers 3927 N at standard shop air to slide heavy sheet metal blanks into a stamping press. The adjustable cushion absorbs the impact of the moving tooling plate at end of stroke.
Pallet Layer Positioning
Moves a stop-gate or layer platen on a palletizer. The sensor-ready barrel provides real-time position signals to the PLC for accurate layer height control.
Is the Airtac SC100 Standard Cylinder SC100X410S the Right Cylinder?
With a 410 mm stroke, this cylinder has a significant extended length (body length A of 188 mm + stroke). For strokes over 300 mm, always check side-load conditions: an unsupported 25 mm rod can bend under radial force. If the application imposes side load, use an external linear guide or a guided cylinder variant to protect the rod bearings and seals. Stepping up in bore to the SC125 series provides 6136 N at 0.5 MPa, while the smaller SC80 delivers 2513 N. For a drop-in replacement, match bore (100 mm), stroke (410 mm), PT1/2 ports, the built-in magnet (-S), and the basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X410S FAQ
At 0.5 MPa (approximately 5 bar), this 100 mm bore cylinder produces a theoretical push force of 3927 N and a pull force of 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
Yes. The -S suffix in the model code SC100X410S indicates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel's sensor groove to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X410S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.