Airtac SC100 Standard Cylinder SC100X465S
The AirTAC Airtac SC100 Standard Cylinder SC100X465S is a genuine double-acting standard air cylinder with a Ø100mm bore and 465mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke465 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X465S
The SC100X465S is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa. Its 100 mm bore and 465 mm stroke suit mid-to-long linear actuation tasks, with a 25 mm diameter piston rod providing robust thrust and buckling resistance.
This model includes a factory-installed -S magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for non-contact position sensing. The adjustable air cushion (29 mm length) decelerates the piston at stroke end, and the PT1/2 port threads ensure straightforward pneumatic connections.
Airtac SC100 Standard Cylinder SC100X465S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X465S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 465 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X465S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×465 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X465S Is Used
Conveyor Diverter Gates
The 465 mm stroke and 3927 N push force at 0.5 MPa reliably actuate heavy diverter gates in material handling lines, while the built-in magnet enables end-of-stroke confirmation via barrel-mounted sensors.
Automated Press Feeders
Delivers consistent, high-force linear motion to advance sheet metal or blanks into stamping presses. The adjustable cushion absorbs impact energy at the end of the 465 mm travel, protecting tooling.
Pallet Stacker Pushers
Provides the long reach and substantial force needed to push loaded pallets onto accumulation conveyors. The -S magnet allows PLC integration for precise mid-stroke and end-stroke position monitoring.
Is the Airtac SC100 Standard Cylinder SC100X465S the Right Cylinder?
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N push at 0.5 MPa. If the load exceeds 3927 N, step up to the 125 mm bore SC125 series at 6136 N. At a 465 mm stroke, ensure the rod is not subjected to high side loads; if lateral forces are present, pair the cylinder with an external linear guide or consider a guided cylinder to prevent rod bending and premature seal wear.
When replacing an existing unit, match five points: 100 mm bore, 465 mm stroke, PT1/2 port thread, the built-in magnet (-S suffix), and the basic (no bracket) mounting configuration. This ensures a direct dimensional and functional swap with another AirTAC SC100 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X465S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code SC100X465S indicates a built-in magnet on the piston. This allows AirTAC CMSG, DMSG, or EMSG sensors to be clamped onto the cylinder's tie-rod barrel for contactless position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X465S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.