
The AirTAC SC100 Standard Cylinder SC100X470S is a genuine double-acting standard air cylinder with a Ø100mm bore and 470mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X470S is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 470 mm stroke, this model features a 25 mm diameter piston rod and PT1/2 ports, making it a robust choice for medium-to-heavy linear actuation tasks.
This unit includes a built-in magnet (-S suffix), allowing easy integration of CMSG, DMSG, or EMSG reed and solid-state sensors directly onto the tie-rod barrel for precise position feedback. The body length A is 188 mm, giving a total extended length of approximately 658 mm, and it uses an adjustable pneumatic cushion to decelerate the piston smoothly at the end of its 29 mm cushion stroke.
| Model | Airtac SC100 Standard Cylinder SC100X470S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 470 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×470 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
With 3927 N of force at standard shop air, this cylinder is ideal for heavy-duty workpiece clamping, small press-fit operations, and assembly fixtures requiring consistent, controlled pressure.
The 470 mm stroke and sensor-ready design suit it for diverting or stopping heavy packages on conveyor lines, with the magnet providing end-of-stroke confirmation to a PLC.
A workhorse for general automation, this cylinder can actuate gates, chutes, or lift mechanisms, with the adjustable cushion protecting the end caps during high-cycle-rate operation.
For applications requiring less force, stepping down to an 80 mm bore provides 2513 N of push at 0.5 MPa, while a 125 mm bore offers a significant jump to 6136 N. At a 470 mm stroke, the 25 mm rod is well-supported, but any significant side load should be managed with an external linear guide to prevent rod bearing wear.
To ensure a correct replacement, match five key points: the 100 mm bore, 470 mm stroke, PT1/2 port thread, the built-in magnet for sensor compatibility, and the basic mounting configuration. This is a tie-rod cylinder with a shorter body than an ISO 15552 profile, so it is not dimensionally interchangeable with those standards.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.7 MPa (approximately 102 psi), the theoretical push force is 5497 N. The pull force on the retract stroke is slightly lower at 3681 N at 0.5 MPa due to the area of the 25 mm rod.
Yes. The -S suffix in the model code SC100X470S indicates a built-in magnet on the piston. You can clamp compatible AirTAC CMSG, DMSG, or EMSG sensors directly onto the cylinder's tie-rod barrel to detect piston position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.