Airtac SC100 Standard Cylinder SC100X565S
The AirTAC Airtac SC100 Standard Cylinder SC100X565S is a genuine double-acting standard air cylinder with a Ø100mm bore and 565mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke565 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X565S
The SC100X565S is a 100 mm bore double-acting pneumatic cylinder with a 565 mm stroke, delivering 3927 N push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide reliable end-of-stroke deceleration for mid-to-heavy linear motion tasks.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for non-contact position feedback. The standard PT1/2 port threads and TPU seals suit filtered-air systems operating from -20 to +70 °C, making it a practical workhorse for automated machinery.
Airtac SC100 Standard Cylinder SC100X565S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X565S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 565 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X565S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×565 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X565S Is Used
Material Handling Pushers
The 3927 N push force at 0.5 MPa moves heavy totes or pallets on roller conveyors, with the 565 mm stroke spanning wide transfer sections.
Clamping & Assembly Fixtures
Delivers up to 7068 N at 0.9 MPa for secure part holding in welding or assembly jigs, with sensor feedback confirming clamp position.
Automated Sorting Gates
The long 565 mm stroke and magnetic piston sensing control diverting gates in logistics hubs, ensuring packages route correctly.
Is the Airtac SC100 Standard Cylinder SC100X565S the Right Cylinder?
For a 100 mm bore at 0.5 MPa, the push force is 3927 N; stepping down to an 80 mm bore reduces push force to 2513 N, while moving up to a 125 mm bore increases it to 6136 N. At a 565 mm stroke, ensure the rod is not subjected to significant side loads—consider an external linear guide or a guided cylinder if the load is not purely axial, as the 25 mm rod can bend under off-axis forces.
When replacing an existing cylinder, match five points: 100 mm bore, 565 mm stroke, PT1/2 port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting style. This SC tie-rod cylinder is shorter than an ISO 15552 profile and is not a dimensional drop-in for that standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X565S FAQ
At 0.5 MPa the push force is 3927 N, at 0.7 MPa it is 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf. Pull force at 0.5 MPa is 3681 N.
Yes. The -S suffix in SC100X565S indicates a built-in magnet on the piston. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to be clamped directly onto the cylinder's tie-rod barrel for end-of-stroke or mid-stroke position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X565S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.