Airtac SC100 Standard Cylinder SC100X575S
The AirTAC Airtac SC100 Standard Cylinder SC100X575S is a genuine double-acting standard air cylinder with a Ø100mm bore and 575mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke575 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X575S
The AirTAC SC100X575S is a double-acting single-rod pneumatic cylinder with a 100 mm bore and a 575 mm stroke, delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide reliable deceleration for mid-to-heavy linear actuation tasks.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for contactless position sensing. With PT1/2 port threads and a body length A of 188 mm, the total extended length reaches approximately 763 mm, making it a compact yet powerful solution for automation.
Airtac SC100 Standard Cylinder SC100X575S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X575S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 575 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X575S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×575 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X575S Is Used
Material Transfer Gates
Actuates diverter gates on conveyor systems, using the 575 mm stroke to sweep packages between lanes with the 3927 N push force at standard line pressure.
Automated Press Feeders
Pushes sheet metal or blanks into stamping presses, where the built-in magnet enables end-of-stroke confirmation via DMSG sensors for cycle safety.
Pallet Layer Positioning
Moves a pallet stop or layer squaring arm across a 575 mm range, leveraging the 25 mm rod’s rigidity and adjustable cushion to handle repetitive impact.
Is the Airtac SC100 Standard Cylinder SC100X575S the Right Cylinder?
For applications requiring slightly less force, stepping down to an 80 mm bore (2513 N push at 0.5 MPa) may reduce air consumption; for heavier loads, the 125 mm bore offers 6136 N at the same pressure. At a 575 mm stroke, ensure the rod is not subjected to significant side loads—consider an external linear guide or a guided cylinder if lateral forces are present. For a direct replacement, match bore, stroke, PT1/2 port thread, the built-in magnet (-S), and basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X575S FAQ
At 0.5 MPa the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors mount directly on the barrel to detect piston position without external flags.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X575S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.