Airtac SC100 Standard Cylinder SC100X780SCB
The AirTAC Airtac SC100 Standard Cylinder SC100X780SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 780mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke780 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X780SCB
The AirTAC SC100X780SCB is a double-acting single-rod tie-rod cylinder delivering 3927 N push force at 0.5 MPa, scaling to 7068 N at the maximum operating pressure of 0.9 MPa. Its 780 mm stroke is well within the 1500 mm maximum standard stroke for the 100 mm bore, and the unit features a 25 mm diameter piston rod with M20x1.5 threads and 29 mm adjustable air cushion for controlled end-of-stroke deceleration.
This specific model is factory-configured with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and a rear double clevis (CB) mount, supplied as part F-SC100CB, which provides a pivoting fork connection at the cap end. The standard PT1/2 port threads and TPU seals with a -20 to +70 °C operating range make it a robust choice for general industrial actuation tasks.
Airtac SC100 Standard Cylinder SC100X780SCB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X780SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 780 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X780SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×780 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X780SCB Is Used
Pallet Lifting & Transfer
The 3927 N push force at 0.5 MPa combined with the rear clevis mount makes this cylinder ideal for pivoting lift mechanisms in palletizers, where the 780 mm stroke elevates loads between conveyor levels smoothly.
Automated Clamping Fixtures
With a built-in magnet for end-of-stroke sensing, this actuator confirms clamp/unclamp status in CNC weld fixtures. The double clevis mount allows the cylinder body to self-align, preventing rod side-load.
Long-Stroke Part Rejection
Deploy the 7068 N peak thrust at 0.9 MPa for high-force pneumatic pushers that divert heavy packages off a main conveyor line, with the adjustable cushion absorbing impact energy at the end of the 780 mm travel.
Is the Airtac SC100 Standard Cylinder SC100X780SCB the Right Cylinder?
Select the SC100X780SCB when your application requires a force class around 3927 N at typical shop air. If your load demands more thrust, stepping up to the 125 mm bore provides 6136 N at the same 0.5 MPa. For lighter, faster cycling, the 80 mm bore offers 2513 N. The 780 mm stroke is long enough that side loading becomes a critical consideration; always use an external guide rail or rod-alignment coupler to prevent bending stress on the 25 mm rod and premature bearing wear.
For a direct replacement, match five key attributes: 100 mm bore, 780 mm stroke, PT port thread, rear double clevis (CB) mounting, and the integrated magnet (-S) for sensor compatibility. This tie-rod SC cylinder is dimensionally shorter than an ISO 15552 profile and will not interchange with ISO 15552 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X780SCB FAQ
At 0.5 MPa, the cylinder pushes with 3927 N and pulls with 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is shorter in overall body length than an ISO 15552 profile cylinder, so mounting dimensions and accessory brackets are not interchangeable. It must replace another AirTAC SC tie-rod cylinder with matching bore, stroke, and CB mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X780SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.