Airtac SC100 Standard Cylinder SC100X800S
The AirTAC Airtac SC100 Standard Cylinder SC100X800S is a genuine double-acting standard air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke800 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X800S
The AirTAC SC100X800S is a tie-rod double-acting cylinder delivering 3927 N of push force at 0.5 MPa (up to 7068 N at 0.9 MPa). With an 800 mm stroke and a 25 mm diameter piston rod, it suits mid-to-long linear movements in clamping, pressing, and material-transfer stations.
The built-in magnet (denoted by the -S suffix) allows CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the barrel for contactless end-of-stroke detection. Its adjustable air cushion (29 mm length) decelerates the piston smoothly, reducing impact noise and wear at the end of each cycle.
Airtac SC100 Standard Cylinder SC100X800S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X800S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X800S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X800S Is Used
Pallet Stop & Transfer
The 800 mm stroke and 3927 N push force at 0.5 MPa reliably stop and transfer heavy pallets on conveyor lines, with sensor feedback confirming the pallet's position.
Heavy-Duty Clamping
With 7068 N of force at 0.9 MPa, this cylinder provides the high clamping pressure needed for woodworking, welding, or assembly fixtures on large workpieces.
Bin Pusher & Diverter
The long 800 mm stroke pushes bins or cartons off a main line onto a spur. The built-in magnet enables precise mid-stroke or end-of-stroke sensing for automated sortation.
Is the Airtac SC100 Standard Cylinder SC100X800S the Right Cylinder?
This 100 mm bore model sits between the SC80 (2513 N at 0.5 MPa) and the SC125 (6136 N at 0.5 MPa). Choose the SC100 when you need more force than an 80 mm bore can provide but the 125 mm bore's larger footprint is unnecessary. At 800 mm stroke, the rod is fully supported within the cylinder, but external side loads must be avoided—use an external guide or a guided cylinder if the load is not purely axial to prevent rod bending and premature seal wear.
For replacement, match these five points: bore (100 mm), stroke (800 mm), PT port thread, the built-in magnet (-S), and the basic mounting style. This cylinder is a direct replacement for another AirTAC SC100X800S tie-rod cylinder with the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X800S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet, making it compatible with AirTAC CMSG, DMSG, and EMSG series reed and solid-state sensors. These sensors clamp directly onto the cylinder barrel's sensor groove for non-contact position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.