Airtac SC100 Standard Cylinder SC100X800TC
The AirTAC Airtac SC100 Standard Cylinder SC100X800TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke800 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X800TC
The SC100X800TC is a double-acting pneumatic cylinder delivering a substantial 3927 N push force at 0.5 MPa (up to 7068 N at 0.9 MPa). With an 800 mm stroke and a rigid 25 mm diameter piston rod, it is built for long linear movements in industrial automation where a pivoting mount is required.
This model includes the TC centre trunnion mount, supplied with the TCM1 bracket (part code F-SC100TC), allowing the cylinder to pivot during operation. The body length A is 188 mm, and the adjustable air cushion (29 mm) decelerates the piston smoothly at stroke ends. Standard PT ports (PT1/2) and TPU seals for -20 to +70 °C are fitted.
Airtac SC100 Standard Cylinder SC100X800TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X800TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X800TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X800TC Is Used
Conveyor Diverters
Pivots a diverter gate across a wide conveyor, using the TC trunnion mount to accommodate the swinging arc of the mechanism.
Clamping Large Fabrications
Provides the high clamping force needed to hold heavy weldments or castings in a fixture, with the long stroke clearing the part for loading.
Pallet Lift & Transfer
Actuates a pivoting lift arm on a pallet transfer station, raising and lowering heavy loads with the cylinder's 3927 N push force at 0.5 MPa.
Is the Airtac SC100 Standard Cylinder SC100X800TC the Right Cylinder?
Choose the SC100 bore when your application needs roughly 3927 N of push force at standard plant pressure. If you can step down to a 80 mm bore, the SC80 provides 2513 N at 0.5 MPa in a lighter package; step up to the SC125 for 6136 N. For this 800 mm stroke, the long unsupported rod is susceptible to bending under side load—consider an external linear guide or a guided cylinder if the load is not purely axial. To replace an existing cylinder, match five points: 100 mm bore, 800 mm stroke, PT port thread, TC centre trunnion mount, and the absence of a magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X800TC FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X800TC is a double-acting cylinder that will drift or drop if pressure is lost or the directional valve is centered. It does not have a locking or holding feature. For load holding without live pressure, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X800TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.