Airtac SC100 Standard Cylinder SC100X80SH
The AirTAC Airtac SC100 Standard Cylinder SC100X80SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 80mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke80 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X80SH
The SC100X80SH is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa, making it a robust choice for medium-to-heavy industrial tasks. Its 80 mm stroke fits compact clamping, pressing, and ejector stations where space is limited but force demand is high.
This model features a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection without external brackets. The 'H' suffix specifies Viton (FKM) seals, extending the operating temperature range to 0–150 °C and providing excellent resistance to aggressive chemicals and high-heat environments. It uses a 25 mm diameter rod with an M20x1.5 thread and PT3/8 ports.
Airtac SC100 Standard Cylinder SC100X80SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X80SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X80SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X80SH Is Used
Hot Press Clamping
The Viton seals withstand 150°C, making this cylinder ideal for clamping fixtures in heated platen presses or thermoforming machines where standard seals would degrade.
Sensor-Controlled Sorting Gate
The built-in magnet allows CMSG sensors to confirm gate position on a high-speed conveyor diverter, ensuring reliable part sorting in automated packaging lines.
Chemical Dosing Actuator
With FKM seals resisting aggressive cleaning agents, this cylinder reliably actuates valves or plungers in chemical dosing and sterilization equipment.
Is the Airtac SC100 Standard Cylinder SC100X80SH the Right Cylinder?
Choose the SC100X80SH when your application needs 3927 N of force at standard plant pressure and you require sensor feedback in a hot or chemically active setting. If you need less force, the SC80 bore offers 2513 N at 0.5 MPa; for significantly more force, step up to the SC125 bore at 6136 N. For strokes of 300 mm or more, evaluate side-load conditions—though at 80 mm this is rarely an issue, any off-axis force should be managed with an external guide. When replacing, match bore (100 mm), stroke (80 mm), PT port thread, the built-in magnet (-S), and the Viton seal (-H) to ensure identical fit and function.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X80SH FAQ
At the standard 0.5 MPa operating pressure, it generates 3927 N of push force. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It must replace another AirTAC SC tie-rod cylinder with matching bore, stroke, PT ports, magnet option, and Viton seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X80SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.