Airtac SC100 Standard Cylinder SC100X923S
The AirTAC Airtac SC100 Standard Cylinder SC100X923S is a genuine double-acting standard air cylinder with a Ø100mm bore and 923mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke923 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X923S
The AirTAC SC100X923S is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa (up to 7068 N at 0.9 MPa). With a 100 mm bore and a 923 mm stroke, it is built for mid-to-long linear moves in clamping, pressing, and material-transfer stations.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for piston-position feedback. The 25 mm diameter rod and 29 mm adjustable air cushion at each end provide smooth deceleration, while the PT1/2 port thread keeps plumbing straightforward.
Airtac SC100 Standard Cylinder SC100X923S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X923S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 923 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X923S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×923 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X923S Is Used
Material Transfer
Pushes bins or pallets across a 923 mm span in automated conveyor lines, with sensor confirmation of full extend and retract.
Clamping & Pressing
Applies up to 7068 N at 0.9 MPa for glue-press or assembly fixtures, with the magnet enabling end-of-stroke detection.
Automated Sorting Gates
Operates a long-travel diverter gate in packaging or sortation systems, using the adjustable cushion to manage inertial loads quietly.
Is the Airtac SC100 Standard Cylinder SC100X923S the Right Cylinder?
Choose the SC100 when your load requires roughly 3927 N at 0.5 MPa. If you can drop to about 2513 N, the 80 mm bore saves space; for heavier work near 6136 N, step up to the 125 mm bore. Because the 923 mm stroke is long relative to the rod diameter, avoid unsupported side loads—use an external linear guide or a guided cylinder to prevent rod bending and premature bearing wear.
For replacement, match five points: 100 mm bore, 923 mm stroke, PT port thread, the built-in magnet (-S), and the basic (no-bracket) mounting. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X923S FAQ
At 0.5 MPa the cylinder pushes with 3927 N and pulls with 3681 N. At 0.7 MPa push rises to 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. A 923 mm stroke with a 25 mm rod is susceptible to bending and accelerated bearing wear under side load. Always support the load with an external linear guide or use a guided-cylinder configuration. The built-in magnet allows you to monitor piston position throughout the long travel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X923S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.