
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X110-10B is a compact double-acting cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 100 and 110 mm without swapping shims or parts.
This variant features a male M8x1.25 piston rod thread and operates without a piston magnet. Its short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 110 mm |
| Adjustable range | 100 – 110 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M8x1.25 screw to fine-tune the 100-110 mm extend position during quick fixture changeovers, avoiding part remachining.
Adjust the mechanical stop on the fly for varying box heights, letting the fixed NBR bumper absorb the end shock safely.
This 25 mm bore sits perfectly in the middle for medium-duty tasks.
Choose this specific configuration if your fixture requires on-site extend tuning between 100 and 110 mm. Confirm your setup needs the male M8x1.25 rod thread, the M5x0.8 air port, and the 10 mm adjustment window. Note that this SKU lacks the -S magnet, so magnetic sensing is impossible here. Finally, a plain cylinder drifts when air is lost or the valve centers; the bumper only decelerates near the end. Use an external rod lock or pilot-operated check valve for load holding without live pressure.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external R (M8x1.25) screw shortens the extend stop from the 110 mm maximum down to 100 mm. It is strictly a mechanical stop, not a mid-stroke lock. The cylinder cannot hold a load on air loss and requires an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.