
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X110-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the extend position down from the 110mm maximum to 90mm directly on your machine, avoiding any part changes or shims.
This model uses a short riveted body to save axial mounting depth where larger profile cylinders cannot fit. It carries a male M8x1.25 piston rod thread for straightforward tool mounting. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 110 mm |
| Adjustable range | 90 – 110 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 90-110mm extend point during machine commissioning to set precise forming depth without machining new spacers.
Quickly reposition the male M8x1.25 rod end stop for different part heights on a packaging line, cutting setup time between batches.
Sweep through extend distances to find the optimal push point for a 12.5 kg test payload before finalizing a fixed-stroke design.
When sizing this 25mm bore actuator, evaluate your force requirements bidirectionally. It is the correct choice for setups requiring on-site stroke tuning across a 90-110mm window.
Confirm your parameters before ordering: 25mm bore, 110mm max stroke, 20mm adjuster window, and an M5x0.8 air port. This SKU includes the -B option, meaning it has a male M8x1.25 rod thread rather than the default female thread. Because a plain double-acting cylinder does not hold position or load when air is lost or the valve is centred, you must integrate an external rod lock or pilot-operated check valve if load holding is required.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The external M8x1.25 R screw acts as a mechanical stop, letting you shorten the extend stroke from the 110mm maximum down to 90mm. This SKU lacks a magnet for switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.