
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-30B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X110-30B is a compact double-acting double-rod cylinder built for tight axial mounting spaces where a round-body unit will not fit. An external M8x1.25 R adjuster screw lets you dial the extend stop down on-site from 110 mm to 80 mm without changing parts.
This specific SKU includes a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 110 mm |
| Adjustable range | 80 – 110 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 110 mm during machine changeovers to accommodate varying part heights without machining new spacers.
Choose the SDAJ25X110-30B if your fixture requires exact 80-110 mm extend tuning during changeovers. Confirm your setup needs the male M8x1.25 rod thread, the M5x0.8 port, and no position sensing. Because the fixed bumper only decelerates the stroke end, a plain cylinder drifts on air loss; integrate an external rod lock or pilot-operated check valve to hold loads safely.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The air port is M5x0.8.
The M8x1.25 R screw acts as a mechanical stop, allowing you to shorten the extend stroke anywhere between 80 and 110 mm. It does not alter force or lock mid-stroke; the cylinder drifts on air loss, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.