
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-50B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X110-50B is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the forward stroke down by up to 50 mm, achieving a precise end-position anywhere between 60 and 110 mm directly on the machine.
This thin, riveted-body design saves valuable axial mounting depth where a larger profile cylinder will not fit. The unit features a fixed NBR bumper at each end to decelerate the stroke, and this specific SKU includes a male M8x1.25 piston rod thread for straightforward tool mounting. Note that without the -S magnet option, it cannot accept magnetic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 110 mm |
| Adjustable range | 60 – 110 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 60 to 110 mm extend stop during prototype runs to find the exact clamping depth before locking the M8x1.25 adjuster screw.
Safely lift components up to 12.5 kg, adjusting the extend endpoint on the fly to accommodate different stack heights without exceeding the 0.5 MPa operating pressure.
Choose this specific model when your fixture requires on-site stroke tuning across a 60 to 110 mm window without swapping parts.
Confirm your requirements for the 25 mm bore, 110 mm maximum stroke, 50 mm adjustability window, and M5x0.8 air port. This variant features a male M8x1.25 rod thread and no piston magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s, with a fixed NBR bumper handling end-of-stroke deceleration.
The external R (M8x1.25) screw mechanically shortens the extend stroke by up to 50 mm, allowing you to set the endpoint anywhere from 60 to 110 mm without changing parts. This specific SKU lacks a piston magnet, so it cannot accept magnetic switches; you would need the -S variant to enable reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.