
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-75B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X110-75B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you shorten the forward stroke on-site across a 35 to 110 mm window, eliminating the need for shims or part swaps during changeovers.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. The bore dictates a 10 mm piston rod and an M5x0.8 air port, while the -B option specifies a male M8x1.25 thread on the rod end. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the end of travel rather than acting as an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X110-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 35 to 110 mm extend stop via the R screw during fixture swaps, accommodating varying part heights without machining new spacers.
Use the 75 mm adjustment window to test multiple extend endpoints rapidly, finding the exact travel before finalizing a machine design.
When sizing this unit, evaluate both neighbouring bores.
Operators requiring frequent on-machine stroke tuning for trial positioning will benefit from the 75 mm adjustment window. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the stroke end. For a held load, specify an external rod lock or a pilot-operated check valve. This configuration includes a male M8x1.25 rod thread, no piston magnet, and a maximum standard stroke of 130 mm.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 50 kgf at 1.0 MPa. The external R screw sets the stop position only and does not alter these force values.
No, this specific SKU lacks the -S option and therefore has no piston magnet, meaning it cannot accept AirTAC reed or electronic switches. If you require position feedback, select the -S variant to add the necessary magnet for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.