
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X130-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X130-20B is a compact double-acting double-rod cylinder built with a space-saving riveted body that minimizes axial mounting depth where larger profile variants fail to fit. It features an external R (M8x1.25) adjuster screw that lets you dial the extend stop down by 20 mm directly on the machine, yielding a usable extend range of 110 to 130 mm without swapping shims or parts. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
This specific SKU includes a male M8x1.25 piston rod thread (option B) for straightforward tool mounting, and it lacks a piston magnet, meaning it cannot host reed or electronic switches without changing to an -S variant. The 130 mm stroke exceeds the 120 mm standard maximum for this 25 mm bore family, classifying it as a nonstandard stroke configuration.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X130-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 130 mm |
| Adjustable range | 110 – 130 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Utilize the compact riveted body to fit tight conveyor frames, adjusting the male M8x1.25 rod end stroke on-site to route packages of varying sizes accurately.
This SDAJ25X130-20B sits perfectly in the middle at 245.4 N, making it ideal for medium-duty positioning. Choose this specific model if your application requires frequent on-site stroke tuning across a 110 to 130 mm window during changeovers. Confirm your setup needs the male M8x1.25 rod thread, the M5x0.8 air port, and the 20 mm adjustment window.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the piston drifts and the fixed NBR bumper only decelerates near the end of the stroke. If your fixture demands load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Additionally, since this unit lacks the -S magnet option, position sensing is not possible with this SKU.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The external R adjuster sets the stop position without altering these force values.
Turning the M8x1.25 R screw shortens the extend stroke by up to 20 mm, allowing you to set the end position anywhere between 110 and 130 mm on the machine. This screw acts only as a mechanical stop; it is not a mid-stroke lock, and the cylinder will not hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.