verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 140 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke140 mm
  • Adjustable range120–140 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$72.08 $79.58Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B

The SDAJ25X140-20B is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop from 120 to 140 mm directly on your machine. This specific 140 mm stroke exceeds the 130 mm standard maximum for a 25 mm bore, making it a non-standard, made-to-order unit.

The short riveted body minimizes axial mounting depth where round-body or profile cylinders will not fit. This SKU includes a male-thread M8x1.25 piston rod for direct mounting and lacks a piston magnet, meaning it cannot accept reed or electronic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke140 mm
Adjustable range120 – 140 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×140Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B Is Used

sync_alt

Changeover Tooling

Turn the M8x1.25 adjuster screw to adapt the male M8 rod end to new product lengths during line changeover, avoiding part swaps and cutting setup time.

precision_manufacturing

Clamp Depth Tuning

Fine-tune the clamping reach on machined fixtures; the fixed NBR bumper absorbs the end shock while the mechanical stop holds your 12.5 kg vertical load position.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B the Right Cylinder?

Choose this specific model when you need on-site extend tuning between 120 and 140 mm without changing parts.

Confirm the 25 mm bore, 140 mm stroke, 20 mm window, and M5x0.8 air port. This variant uses a male M8x1.25 rod thread and has no magnet. Remember that a plain cylinder does not hold its load when air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 120–140 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B FAQ

The theoretical maximum push is 50 kgf at 1.0 MPa.

The external M8x1.25 screw mechanically shortens the extend end position from the 140 mm maximum down to 120 mm. It sets the stop and does not alter force, and it is not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X140-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.