
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-50B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 140 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X140-50B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the outward stroke down by up to 50 mm directly on the machine, yielding a usable extend range of 90 to 140 mm without swapping shims or parts.
This unit features a male-thread M8x1.25 piston rod and a short riveted body that minimizes axial mounting depth where round-body or larger profile units will not fit. It relies on a fixed NBR bumper at each end to decelerate the stroke end, meaning it is not an adjustable air cushion. Note that this 140 mm stroke exceeds the 130 mm standard maximum for a 25 mm bore, making it a non-standard, made-to-order configuration.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X140-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 140 mm |
| Adjustable range | 90 – 140 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×140 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 90 to 140 mm to find the exact contact point on prototype jigs without machining new spacers.
Leverage the short riveted body to fit within tight axial envelopes where longer cylinders would violate the machine guard.
Choose this specific model if your fixture requires frequent on-site stroke tuning or trial positioning. Confirm your parameters: 25 mm bore, 140 mm max stroke, 50 mm adjust window, M5x0.8 air port, and the male M8x1.25 rod thread. Because this SKU lacks the -S magnet, it cannot accept reed or electronic switches. Finally, a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and is not a lock, so integrate an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 R screw mechanically shortens the extend end position from 140 mm down to 90 mm. It does not alter force and is not a mid-stroke lock. The cylinder cannot hold a load on air loss and requires an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.