verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke15 mm
  • Adjustable range0–15 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$29.53 $37.03Save 20% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B

The AirTAC SDAJ25X15-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the forward end-position down from the 15 mm maximum to zero, providing exact 0-15 mm on-machine tuning without swapping shims or parts.

This variant uses a male M8x1.25 piston rod thread and includes no piston magnet. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke15 mm
Adjustable range0 – 15 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×15Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B Is Used

sync_alt

Rapid Tooling Changeover

Use the external M8x1.25 adjuster screw to reposition the male rod end on-site during product family swaps, eliminating the need to mechanically shim the cylinder.

straighten

Trial Positioning Jigs

Iteratively set the extend stop during prototype assembly fixturing, finding the exact 0-15 mm endpoint while the fixed NBR bumper manages end-shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B the Right Cylinder?

When sizing this 25 mm bore, evaluate both neighboring options.

Choose this specific male-rod (-B) configuration when your tooling requires an M8x1.25 threaded attachment point. The 20 mm adjustment window over a 15 mm nominal stroke allows ultimate flexibility for trial positioning during changeovers. Remember that a plain cylinder does not hold position upon air loss or valve centering—the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your required port size (M5x0.8 for this bore) and note that this SKU lacks the -S magnet, meaning it cannot accept reed or electronic switches.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–15 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B FAQ

The theoretical maximum push is 50 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a 0.15-1.0 MPa pressure range.

The M8x1.25 R screw mechanically shortens the extend stop from the 15 mm maximum down to 0 mm. The screw only sets the end position; it does not alter the force or act as a mid-stroke lock. The cylinder cannot hold a load on air loss, so you must use an external rod lock for holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X15-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X15-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.