
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X20-10 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X20-10 is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop anywhere between 10 and 20 mm on-site. The short riveted body minimizes axial mounting depth where round-body or profile units will not fit.
End-of-travel shock is handled solely by a fixed NBR bumper, meaning there is no adjustable air cushion. Operating speed spans 30-500 mm/s, and the 25 mm bore dictates an M5x0.8 air port alongside a 10 mm rod. This specific SKU lacks a piston magnet, so position sensing is not supported without switching to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X20-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 20 mm during die swaps, letting operators set probe contact depth without machining custom spacers.
Set precise metal-forming endpoints on trial brackets, relying on the fixed NBR bumper to absorb the 0.5 MPa impact repeatedly.
Choose this unit when a setup-heavy line requires frequent on-machine stroke tuning across the 10-20 mm window.
Confirm the 20 mm maximum stroke, 10 mm adjustability window, and M5x0.8 port suit your manifold. The female M5x0.8 rod-end thread mounts standard clevis joints. Remember that a plain SDAJ cannot hold a load upon air loss or valve centering—the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the M8x1.25 R screw shortens the extend endpoint down to 10 mm from the 20 mm maximum.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.