
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X25-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X25-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the extend position down from the 25mm maximum to a 5mm minimum directly on the machine, eliminating shims or part swaps.
This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. The unit includes a male M8x1.25 piston rod thread, an M5x0.8 air port, and relies on a fixed NBR bumper to decelerate the stroke end. Operating speeds span 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X25-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 5 and 25 mm during machine setup to accommodate varying fixture heights without machining new spacers.
Use the M8x1.25 male rod thread to test actuation endpoints on trial assemblies, adjusting the mechanical stop in 1 mm increments.
Stepping down to the SDAJ20 drops the output to 157.1 N, while moving up to the SDAJ32 increases it to 402.1 N. Choose this adjustable model if your assembly requires frequent on-site stroke tuning or trial positioning.
Confirm your parameters before ordering: a 25mm bore, 25mm maximum stroke, 20mm adjustment window, and an M5x0.8 port. This configuration includes the -B option for a male M8x1.25 rod end. Note that this SKU lacks the -S magnet, meaning it cannot accept AirTAC reed or electronic switches. Furthermore, the fixed bumper only decelerates the stroke end; a plain cylinder does not hold its load on air loss or valve centering, so utilize an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The external M8x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 25mm maximum down to 5mm. It does not alter the cylinder's force output or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.