
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-10 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X30-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the extend position down from the nominal 30 mm to as little as 20 mm directly on the machine, eliminating the need for shims or part swaps during setup. The retract stroke remains full length.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End shock is managed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 30 mm via the M8 screw to accommodate varying jig heights on machining lines without machining new spacers.
Saves axial depth in tight assembly fixtures while enabling engineers to safely probe the correct extend endpoint for delicate 12.5 kg vertical lifts.
When sizing this 25 mm bore actuator, evaluate your force requirements bidirectionally. Choose this model if your fixture requires frequent on-site stroke tuning between 20 and 30 mm.
Confirm your specifications: 25 mm bore, 30 mm maximum stroke, 10 mm adjust window, and an M5x0.8 port. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches. Note that a plain cylinder does not hold a load if air pressure is lost or the valve is centered; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external M8x1.25 screw shortens the extend stop by up to 10 mm, giving a usable extend range of 20 to 30 mm. The screw is only a mechanical stop and does not alter force. The cylinder cannot hold a load on air loss; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.